Visual Tools
Calculators
Tables
Mathematical Keyboard
Converters
Other Tools

How to Find a Volume with Cylindrical Shells

Slice the region parallel to the axis of rotation instead: each strip sweeps out a thin cylindrical shell of volume 2π⋅radius⋅height⋅thickness2\pi \cdot \text{radius} \cdot \text{height} \cdot \text{thickness}. Shells avoid solving for xx when the region is given as y=f(x)y = f(x) and the axis is vertical.

Recognize the task

Rotation about the yy-axis (or another vertical line) of a region given by y=f(x)y = f(x); or the washer method would need two different outer or inner functions. Test: is the strip parallel to the axis easier to describe than the slice perpendicular to it?
The alternative slicing is the disk and washer method; both give the same volume. The integral is evaluated with the Fundamental Theorem.

Two ways to do it

Shells about a vertical axisusual choice
V=∫ab2π x f(x) dxV = \int_a^b 2\pi\,x\,f(x)\,dx
Vertical strip at xx: radius xx (distance to the yy-axis), height f(x)f(x). About x=kx = k the radius becomes ∣x−k∣|x - k|.
Shells about a horizontal axisregion given as x(y)
V=∫cd2π y g(y) dyV = \int_c^d 2\pi\,y\,g(y)\,dy
Horizontal strip at yy: radius yy, height g(y)g(y) (the width of the region at that yy).

Steps

StepOn y=x−x2y = x - x^2, 0≤x≤10 \le x \le 1, about the y-axis
1Draw a strip parallel to the axis of rotation. For a vertical axis, a vertical strip at position xx with thickness dxdx.vertical strip at xx, from y=0y = 0 up to y=x−x2y = x - x^2
2Write the radius and the height. Radius: distance from the strip to the axis. Height: length of the strip (top curve minus bottom curve).r=x,h=x−x2r = x,\qquad h = x - x^2
3Set up ∫ 2π r h across the region. The limits run across the region in the strip variable, from the first strip to the last.V=2π∫01x (x−x2) dxV = 2\pi\int_0^1 x\,(x - x^2)\,dx
4Integrate. Expand, power rule, evaluate.Power rule for integrals ↗V=2π[x33−x44]01=2π⋅112=π6V = 2\pi\Big[\frac{x^3}{3} - \frac{x^4}{4}\Big]_0^1 = 2\pi\cdot\frac{1}{12} = \frac{\pi}{6}

Worked examples

Example 1 · about the y-axis

basic
y=x−x2y = x - x^2, 0≤x≤10 \le x \le 1, about the yy-axis
r=xr = x, h=x−x2h = x - x^2
V=2π∫01(x2−x3) dx=π6V = 2\pi\int_0^1 (x^2 - x^3)\,dx = \frac{\pi}{6}

Example 2 · a region a washer would struggle with

no solving for x
under y=xy = \sqrt{x}, 0≤x≤40 \le x \le 4, about the yy-axis
r=xr = x, h=xh = \sqrt{x}
V=2π∫04x3/2 dx=2π⋅25[x5/2]04V = 2\pi\int_0^4 x^{3/2}\,dx = 2\pi\cdot\frac{2}{5}\big[x^{5/2}\big]_0^4
power rule
=4π5⋅32=128π5= \frac{4\pi}{5}\cdot 32 = \frac{128\pi}{5}

Example 3 · about a shifted vertical axis

axis x = 2
y=x−x2y = x - x^2, 0≤x≤10 \le x \le 1, about x=2x = 2
radius 2−x2 - x, same height
V=2π∫01(2−x)(x−x2) dx=2π∫01(2x−3x2+x3) dxV = 2\pi\int_0^1 (2 - x)(x - x^2)\,dx = 2\pi\int_0^1 (2x - 3x^2 + x^3)\,dx
expand
=2π(1−1+14)=π2= 2\pi\Big(1 - 1 + \frac{1}{4}\Big) = \frac{\pi}{2}

See it happen

Unroll one shell: it becomes a rectangular slab of length 2πr2\pi r (the circumference), height hh and thickness dxdx. That is where 2πrh dx2\pi r h\,dx comes from. Shells and washers always give the same volume; they differ only in how the solid is cut.

Common mistakes

Using the height as the radius

✗ 2π∫f(x)⋅f(x) dx2\pi\int f(x)\cdot f(x)\,dx
✓ the radius is the distance from the strip to the axis, here xx

Wrong radius for a shifted axis

✗ r=xr = x for rotation about x=2x = 2
✓ r=2−xr = 2 - x

Limits in the wrong variable

✗ yy-limits with a dxdx integral
✓ the limits run across the region in the strip variable xx

Dropping 2π

✗ ∫01x(x−x2) dx=112\int_0^1 x(x - x^2)\,dx = \frac{1}{12}
✓ 2π⋅112=π62\pi\cdot\frac{1}{12} = \frac{\pi}{6}