Visual Tools
Calculators
Tables
Mathematical Keyboard
Converters
Other Tools

How to Find a Volume with the Disk and Washer Methods

Revolve a region around an axis and slice the solid perpendicular to that axis: each slice is a disk of area πr2\pi r^2, or a washer of area π(R2−r2)\pi(R^2 - r^2) when there is a hole. Integrate the slice area along the axis.

Recognize the task

"The region bounded by … is rotated about the xx-axis (or y=1y = 1, or the yy-axis); find the volume." Test: a solid of revolution, and the slices perpendicular to the axis of rotation are circles or rings.
The integral is a definite integral of the cross-section area; the site has no separate lesson on volumes, so this page is where the method lives. The other slicing is the shell method.

Two ways to do it

Disksregion touches the axis
V=∫abπ [r(x)]2 dxV = \int_a^b \pi\,[r(x)]^2\,dx
Each slice is a full circle. The radius is the distance from the curve to the axis of rotation.
Washersregion does not touch the axis
V=∫abπ([R(x)]2−[r(x)]2) dxV = \int_a^b \pi\big([R(x)]^2 - [r(x)]^2\big)\,dx
Each slice is a ring: outer radius RR from the far curve, inner radius rr from the near curve, both measured to the axis.

Steps

StepOn y=xy = \sqrt{x}, 0≤x≤40 \le x \le 4, about the x-axis
1Sketch the region and the axis; draw one slice perpendicular to the axis. The slice is a disk if the region reaches the axis, a washer if there is a gap.slice at xx: a disk, since the region sits on the axis
2Write the radius (or both radii) as a distance to the axis. For the xx-axis the radius is yy itself; for the axis y=ky = k it is ∣y−k∣|y - k|.r(x)=x−0=xr(x) = \sqrt{x} - 0 = \sqrt{x}
3Set up the integral along the axis. Limits run along the axis of rotation, from where the region starts to where it ends.V=∫04π(x)2 dx=π∫04x dxV = \int_0^4 \pi(\sqrt{x})^2\,dx = \pi\int_0^4 x\,dx
4Integrate. Power rule and Fundamental Theorem. Keep the π\pi.Power rule for integrals ↗V=π[x22]04=8πV = \pi\Big[\frac{x^2}{2}\Big]_0^4 = 8\pi

Worked examples

Example 1 · disks about the x-axis

basic
y=xy = \sqrt{x}, 0≤x≤40 \le x \le 4, about the xx-axis
r=xr = \sqrt{x}
V=π∫04x dx=8πV = \pi\int_0^4 x\,dx = 8\pi

Example 2 · washers between two curves

R and r
between y=xy = x and y=x2y = x^2, about the xx-axis
cross at 00 and 11; R=xR = x, r=x2r = x^2
V=π∫01(x2−x4) dxV = \pi\int_0^1 (x^2 - x^4)\,dx
R2−r2R^2 - r^2
=π(13−15)=2π15= \pi\Big(\frac{1}{3} - \frac{1}{5}\Big) = \frac{2\pi}{15}

Example 3 · about a shifted axis

axis y = 1
under y=x2y = x^2, 0≤x≤10 \le x \le 1, about y=1y = 1
outer radius 1−0=11 - 0 = 1, inner radius 1−x21 - x^2
V=π∫01[1−(1−x2)2] dx=π∫01(2x2−x4) dxV = \pi\int_0^1 \big[1 - (1 - x^2)^2\big]\,dx = \pi\int_0^1 (2x^2 - x^4)\,dx
expand
=π(23−15)=7π15= \pi\Big(\frac{2}{3} - \frac{1}{5}\Big) = \frac{7\pi}{15}

See it happen

A slice perpendicular to the axis is a circle because every point of the region sweeps out a circle around the axis. The radius is a distance to the axis, so an axis at y=1y = 1 changes every radius to 1−y1 - y, not yy.

Common mistakes

Radius measured to the wrong line

✗ r=x2r = x^2 for rotation about y=1y = 1
✓ r=1−x2r = 1 - x^2: distance from the curve to the axis

Squaring the difference

✗ π∫(R−r)2 dx\pi\int (R - r)^2\,dx
✓ π∫(R2−r2) dx\pi\int (R^2 - r^2)\,dx

Slicing parallel to the axis

✗ disks in xx for a rotation about the yy-axis with y=f(x)y = f(x)
✓ slice perpendicular to the axis (solve for x(y)x(y)), or use shells

Dropping π

✗ ∫04x dx=8\int_0^4 x\,dx = 8
✓ 8π8\pi